Search
Filters
Close

0% Finance Now Available Over 6-12 Months!

Minimum basket value £300

Cobra King F9 Speedback ONE Length Irons & F9 Speedback Driver Package (8 Clubs)

Special Offer! Cobra F9 Speedback ONE Length irons 5-GW (7 Irons) plus the No.1 selling driver the F9 Speedback in an amazing package set for only £839.99. That's 8 clubs in total. Only 1 set available though!! Regular flex only. Driver loft is 9 degree with a regular Atmos Blue shaft.
Delivery date: Next Business Day (If ordered before 1pm - Please Note: N.Ireland, Channel Islands and Remote Areas of Scotland would be 2 Days)
Manufacturer: Cobra
*
*
*
*
*
*
*
*
£839.99

 

WHAT IS IT

Each ONE Length iron is designed to match 7-iron length and weighting to deliver consistent feel, trajectories and distance gapping through the set.

WHO IT'S FOR

Ideal for 5 to 25 handicaps with moderate to faster swing speeds seeking a forgiving distance iron with great feel. ONE Length allows you to swing every iron like it's your trusty 7-iron.

The Cobra ONE Length irons are inspired by the revolutionary swing philosophy pioneered by Bryson Dechambeau on Tour. A ONE Length configuration allows you to use one repeatable setup and swing through the set, resulting in more consistency and accuracy.

 

ONE LENGTH. 
ONE SWING.

Engineered using matching 7-iron length and weight specifications, a ONE Length configuration simplifies your game by reducing variability in your setup and swing for increased consistency.

 

WIDER SOLE WIDTHS

Wider soles in the 4-6 irons lower the club's center of gravity to deliver hybrid-like distance, launch and forgiveness with iron-like precision.

 

PROGRESSIVE SHAFT WEIGHTING

Premium aftermarket KBS shafts in three different weights (KBS Tour 80 in the 4-6i, KBS Tour 90 in the 7-9i, and KBS Wedge in the GW-SW) optimize launch, feel and trajectory through the set.

 

SPEEDBACK
DESIGN.

Much like a wide-body kit adds to the stability of a racecar, SPEEDBACK shaping utilizes a belt of steel that adds mass low and wide, creating a lower, deeper CG that maximizes ball speed, launch and carry while maintaining a conventional sole width.

 

FORGED E9 PWRSHELL FACE

An E9 variable thickeness face design is 1.8mm at its thinnest point, expanding the SWEET ZONE to increase distance on off-center hits. A forged PWRSHELL design features a deep undercut sole with a 1.2mm internal Speed Channel that returns more energy to the ball for higher launch and faster ball speeds.

 

HIGH MOI DESIGN WITH TUNGSTEN

SPEEDBACK adds more mass low and wide compared to a conventional game improvement iron. 33 grams of tungsten is combined in the heel and toe in the 4-7 iron, increasing MOI for maximum stability, higher inertia, and substantial improvements in ball speed, distance and forgiveness.

 

BEST IN
CLASS FEEL.

A 3-piece multi-material medallion combines aluminum, TPU (Thermoplastic Polyurethane) and acrylic foam. These lightweight materials damp vibrations to promote a softer, more responsive feel that is not normally found in a game improvement iron.

 

CNC MILLED 
FACE AND GROOVES.

CNC milling is a highly precise manufacturing method that is typically only found in forged player's irons. This process allows us to create perfectly flat faces, and precise lofts and groove shapes in every iron we manufacture.

 

PROGRESSIVE
SPIN TECHNOLOGY.

Progressive groove shapes are CNC milled into each face to optimize spin performance in the long irons, mid-irons and wedges.

 

4-7I
MILLED V-GROOVES

CNC milled V-grooves reduce spin for increased distance and flight time.

 

8I-PW
MILLED U-GROOVES

CNC milled U-Grooves optimize spin for improved control and accuracy.

 

GW-SW
WEDGE GROOVES

Tighter-spaced, U-grooves increase spin for improved precision around the green.

 

PROGRESSIVE
HOSEL LENGTHS.

Shorter hosels in the long irons (4-6) lower the CG to increase launch and distance, medium hosels in the mid irons (7-9 iron) create a gradual transition from the long irons and taller hosels in the wedges (GW-SW) raise the CG to promote control and accuracy.

 

PRACTICE SMARTER.
IMPROVE FASTER.

COBRA CONNECT grips feature embedded sensors that work in conjunction with the Arccos Caddie mobile app - the award-winning connected golf system that helps players of all skill levels make smarter, data-driven decisions and shoot lower scores.

 

GET BETTER, FASTER.

Leverage the power of data to take your game to the next level. Arccos Caddie users improved their handicaps 36.4 times faster than the average golfer.

TOUR ANALYTICS.

COBRA CONNECT™ analyzes every aspect of your game, while providing you with advanced GPS distances to any point on the course so you can make smarter shot decisions.

ELIMINATE THE GUESSWORK

Know true distance averages for every club in your bag as well as your strengths and weaknesses so you can hit more greens and lower your scores.

SEAMLESS TECHNOLOGY.

Lightweight COBRA CONNECT™ sensors are seamlessly embedded in the end of each grip to ensure comfort during the swing, without affecting weighting or performance.

 

 

COBRA is in the business of innovation. With SPEEDBACK, they have achieved a revolutionary advancement in driver technology, engineering the first driver to successfully combine an aerodynamic clubhead shape with a low center of gravity, creating the ULTIMATE FORMULA FOR SPEED.

 

The KING F9 SPEEDBACK driver is the first of its kind to achieve true optimization of aerodynamics combined with a low center of gravity, making it the fastest and longest COBRA driver ever.

 

SPEEDBACK Technology delivers our most aerodynamic clubhead shape and is the first to combine a raised skirt, raised tail/aft, a raised & rounded crown, and a rounded frontal perimeter that reduce drag for maximum club speed.

 

The addition of a low, SPEEDBACK weight structure maintains a low, deep CG that has never before been combined with efficient aerodynamics. Without it, the raised aerodynamic features (skirt, tail/aft & crown) would raise the CG, negatively impacting spin and launch.

 

In an industry where everyone claims to have a fast face, ours is the only one that's CNC milled. To achieve optimal performance, utilizing the most precise manufacturing processes is critical. A process that is five times more precise than conventional hand polished drivers, CNC milling delivers our thinnest, hottest face repeatedly on every driver we manufacture.

 

Continually pushing the boundaries of innovation, COBRA engineers have created golf's first-ever carbon fiber wrap crown design that wraps around the body, delivering a 12% larger carbon fiber area that saves 10 grams compared to titanium driver crowns.

 

COBRA CONNECT analyses every aspect of your game, while providing you with advanced GPS distances to any point on the course so you can eliminate guesswork and make smarter shot decisions.4

 

 

 

WHAT IS IT

 

SPEEDBACK Technology is a revolutionary advancement in engineering, creating the first driver to successfully combine an aerodynamic shape with a low center of gravity to optimize club speed and ball speed for maximum distance.

 

 

 

WHO IT'S FOR

 

Three different models (9.0, 10.5 and 12.0) feature 8 adjustable lofts and a front to back adjustable CG system, allowing golfers of all abilities (Tour to 25 handicaps) to find the perfect launch & spin configuration for their game.

 

 

 

Our engineers identified a common problem in today's driver designs: to get optimal aerodynamic properties, you have to sacrifice other parts of the design. SPEEDBACK™ Technology is a revolutionary breakthrough in driver engineering and is the first to combine a streamlined, aerodynamic shape with a low center of gravity. Paired with the only CNC milled driver face, it delivers substantial improvements in club speed, ball speed and distance without sacrificing forgiveness.

 

 

 

THE ULTIMATE
FORMULA FOR SPEED.

 

Longer starts with Faster. Faster starts with SPEEDBACK, a revolutionary advancement in low CG, efficient aerodynamics, and precision CNC milled face technology that delivers the Ultimate Formula For Speed.

 

 

 

SPEEDBACK AERO DESIGN.

 

SPEEDBACK Technology delivers Cobra's most aerodynamic club shape which utilizes rounded leading edges, a raised crown, a raised skirt and a raised tail. This design streamlines the clubhead to promote an uninterrupted flow of air from the leading edge to the tail, to reduce drag and increase club speed.

 

 

 

OPTIMIZED AERO AND LOW CG.

 

A low CG structure comprised of titanium and tungsten moves the CG low and deep, creating a more efficient transfer of energy to the ball for optimized launch and spin, while maintaining an aerodynamic shape.

 

 

 

CNC PRECISION
MILLED FACE.

 

In an industry where everyone claims to have a fast driver face, ours is the only one that is CNC milled. A process that is up to 5 times more precise than conventional hand-polished driver faces, CNC milling delivers our thinnest and hottest face design repeatedly on every driver.

 

 

 

UP TO 5 TIMES
MORE PRECISE

 

CNC milling allows face thicknesses and curvatures to be controlled to tighter tolerances, ensuring consistent performance across every driver manufactured.

 

 

 

NDUSTRY LEADING
TECHNOLOGY

 

CNC milling is an industry leading technology that took two and a half years to perfect. We are the only company to feature CNC milling in both our driver and fairway faces.

 

 

 

OUR THINNEST
& HOTTEST FACE

 

CNC milling yields more precise face thickness compared to manual hand polishing, allowing us to design a thinner and faster conforming face.

 

 

 

SPEED TUNED
PERFORMANCE.

 

Dual Roll adds distance to your drives by reducing the gear effect that negatively impacts launch and spin on shots hit high and low on the face. Each driver is SPEED TUNED with optimized top and bottom curvatures to tune launch and spin for different swing speeds and attack angles.

 

 

 

DUAL ROLL TECHNOLOGY.

 

Bulge and roll curvatures are CNC milled into the face following exact specifications in the 3D CAD file design to ensure consistent performance in every driver we manufacture.

 

1. TOP ROLL CURVATURE

 

The top half features more curvature than the bottom half of the face to promote higher launch with reduced spin on shots hit above the centerline.

 

2. 7-DEGREE AXIS TILT

 

The axis is tilted at a 7 degree angle to account for the amount of toe droop that occurs during a typical swing.

 

3. BOTTOM ROLL CURVATURE

 

The bottom curvature is SPEED TUNED to optimize the loft of each driver head (9.0, 10.5, 12.0 to 12.5 women's & junior's) to maximize launch and spin for different swing speeds and attack angles on shots hit below the centerline.

 

 

 

PERFECTED BULGE

 

Three different horizontal bulge curvatures are CNC milled into the face to control loft and face angle on the heel, toe and center areas. Having perfected bulge curvatures is crucial to minimize the gear effect on shots hit on the toe and on the heel so the ball ends up closer to the target line.

 

 

 

E9 TECHNOLOGY

 

E9 Technology is a variable thickness structure designed in an elliptical shape (along 9 different points) that expands the SWEET ZONE across a typical miss-hit pattern that ranges from the low heel to high toe areas.

 

 

 

STRAIGHTER, MORE
CONSISTENT BALL FLIGHTS.

 

E9 and Dual Roll technologies are optimized for each driver loft, while CNC milling creates precise bulge and roll curvatures to improve driving accuracy and distance on off-center hits.

 

 

 

COBRA'S FIRST EVER
CARBON WRAP CROWN

 

Continually pushing the boundaries of innovation, Cobra engineers have created our largest carbon fiber crown design that is the first to wrap over the crown onto the body. This design produces a 12% larger carbon fiber area that saves 10 grams compared to titanium driver crowns.

 

 

 

PWR RIDGES

 

Engineered creases called PWR Ridges frame alignment and add rigidity to the carbon crown structure to create more energy return and power to the ball to maximize speed.

 

 

 

360 AERO TECHNOLOGY

 

Polymer crown trips are positioned relative to the direction of airflow around the club head to reduce drag and increase clubhead speed. Using a lightweight polymer material on the crown trips improves aerodynamics without raising the center of gravity. Titanium trips are positioned on the sole to speed up the flow of air traveling underneath the driver.

 

 

 

TUNE YOUR
BALL FLIGHT.

 

The KING® F9 SPEEDBACK™ drivers feature adjustable center of gravity (CG) and MyFly loft technologies, allowing you to fine-tune trajectory and launch to maximize distance.

 

 

 

ADJUSTABLE CG

 

Customize your center of gravity (CG) position using moveable weight technology. A heavy weight (14g) and lightweight (2g) can be moved to the front or back position to fine-tune trajectory, launch and spin.

 

 

 

MYFLY 8 WITH SMART PAD

 

8 easily adjustable loft settings allow players to manage launch and spin conditions to optimize distance. Smart Pad Technology keeps the face square at address regardless of the loft setting.

 

 

 

 

 

WHAT IS IT

Each ONE Length iron is designed to match 7-iron length and weighting to deliver consistent feel, trajectories and distance gapping through the set.

WHO IT'S FOR

Ideal for 5 to 25 handicaps with moderate to faster swing speeds seeking a forgiving distance iron with great feel. ONE Length allows you to swing every iron like it's your trusty 7-iron.

The Cobra ONE Length irons are inspired by the revolutionary swing philosophy pioneered by Bryson Dechambeau on Tour. A ONE Length configuration allows you to use one repeatable setup and swing through the set, resulting in more consistency and accuracy.

 

ONE LENGTH. 
ONE SWING.

Engineered using matching 7-iron length and weight specifications, a ONE Length configuration simplifies your game by reducing variability in your setup and swing for increased consistency.

 

WIDER SOLE WIDTHS

Wider soles in the 4-6 irons lower the club's center of gravity to deliver hybrid-like distance, launch and forgiveness with iron-like precision.

 

PROGRESSIVE SHAFT WEIGHTING

Premium aftermarket KBS shafts in three different weights (KBS Tour 80 in the 4-6i, KBS Tour 90 in the 7-9i, and KBS Wedge in the GW-SW) optimize launch, feel and trajectory through the set.

 

SPEEDBACK
DESIGN.

Much like a wide-body kit adds to the stability of a racecar, SPEEDBACK shaping utilizes a belt of steel that adds mass low and wide, creating a lower, deeper CG that maximizes ball speed, launch and carry while maintaining a conventional sole width.

 

FORGED E9 PWRSHELL FACE

An E9 variable thickeness face design is 1.8mm at its thinnest point, expanding the SWEET ZONE to increase distance on off-center hits. A forged PWRSHELL design features a deep undercut sole with a 1.2mm internal Speed Channel that returns more energy to the ball for higher launch and faster ball speeds.

 

HIGH MOI DESIGN WITH TUNGSTEN

SPEEDBACK adds more mass low and wide compared to a conventional game improvement iron. 33 grams of tungsten is combined in the heel and toe in the 4-7 iron, increasing MOI for maximum stability, higher inertia, and substantial improvements in ball speed, distance and forgiveness.

 

BEST IN
CLASS FEEL.

A 3-piece multi-material medallion combines aluminum, TPU (Thermoplastic Polyurethane) and acrylic foam. These lightweight materials damp vibrations to promote a softer, more responsive feel that is not normally found in a game improvement iron.

 

CNC MILLED 
FACE AND GROOVES.

CNC milling is a highly precise manufacturing method that is typically only found in forged player's irons. This process allows us to create perfectly flat faces, and precise lofts and groove shapes in every iron we manufacture.

 

PROGRESSIVE
SPIN TECHNOLOGY.

Progressive groove shapes are CNC milled into each face to optimize spin performance in the long irons, mid-irons and wedges.

 

4-7I
MILLED V-GROOVES

CNC milled V-grooves reduce spin for increased distance and flight time.

 

8I-PW
MILLED U-GROOVES

CNC milled U-Grooves optimize spin for improved control and accuracy.

 

GW-SW
WEDGE GROOVES

Tighter-spaced, U-grooves increase spin for improved precision around the green.

 

PROGRESSIVE
HOSEL LENGTHS.

Shorter hosels in the long irons (4-6) lower the CG to increase launch and distance, medium hosels in the mid irons (7-9 iron) create a gradual transition from the long irons and taller hosels in the wedges (GW-SW) raise the CG to promote control and accuracy.

 

PRACTICE SMARTER.
IMPROVE FASTER.

COBRA CONNECT grips feature embedded sensors that work in conjunction with the Arccos Caddie mobile app - the award-winning connected golf system that helps players of all skill levels make smarter, data-driven decisions and shoot lower scores.

 

GET BETTER, FASTER.

Leverage the power of data to take your game to the next level. Arccos Caddie users improved their handicaps 36.4 times faster than the average golfer.

TOUR ANALYTICS.

COBRA CONNECT™ analyzes every aspect of your game, while providing you with advanced GPS distances to any point on the course so you can make smarter shot decisions.

ELIMINATE THE GUESSWORK

Know true distance averages for every club in your bag as well as your strengths and weaknesses so you can hit more greens and lower your scores.

SEAMLESS TECHNOLOGY.

Lightweight COBRA CONNECT™ sensors are seamlessly embedded in the end of each grip to ensure comfort during the swing, without affecting weighting or performance.

 

 

COBRA is in the business of innovation. With SPEEDBACK, they have achieved a revolutionary advancement in driver technology, engineering the first driver to successfully combine an aerodynamic clubhead shape with a low center of gravity, creating the ULTIMATE FORMULA FOR SPEED.

 

The KING F9 SPEEDBACK driver is the first of its kind to achieve true optimization of aerodynamics combined with a low center of gravity, making it the fastest and longest COBRA driver ever.

 

SPEEDBACK Technology delivers our most aerodynamic clubhead shape and is the first to combine a raised skirt, raised tail/aft, a raised & rounded crown, and a rounded frontal perimeter that reduce drag for maximum club speed.

 

The addition of a low, SPEEDBACK weight structure maintains a low, deep CG that has never before been combined with efficient aerodynamics. Without it, the raised aerodynamic features (skirt, tail/aft & crown) would raise the CG, negatively impacting spin and launch.

 

In an industry where everyone claims to have a fast face, ours is the only one that's CNC milled. To achieve optimal performance, utilizing the most precise manufacturing processes is critical. A process that is five times more precise than conventional hand polished drivers, CNC milling delivers our thinnest, hottest face repeatedly on every driver we manufacture.

 

Continually pushing the boundaries of innovation, COBRA engineers have created golf's first-ever carbon fiber wrap crown design that wraps around the body, delivering a 12% larger carbon fiber area that saves 10 grams compared to titanium driver crowns.

 

COBRA CONNECT analyses every aspect of your game, while providing you with advanced GPS distances to any point on the course so you can eliminate guesswork and make smarter shot decisions.4

 

 

 

WHAT IS IT

 

SPEEDBACK Technology is a revolutionary advancement in engineering, creating the first driver to successfully combine an aerodynamic shape with a low center of gravity to optimize club speed and ball speed for maximum distance.

 

 

 

WHO IT'S FOR

 

Three different models (9.0, 10.5 and 12.0) feature 8 adjustable lofts and a front to back adjustable CG system, allowing golfers of all abilities (Tour to 25 handicaps) to find the perfect launch & spin configuration for their game.

 

 

 

Our engineers identified a common problem in today's driver designs: to get optimal aerodynamic properties, you have to sacrifice other parts of the design. SPEEDBACK™ Technology is a revolutionary breakthrough in driver engineering and is the first to combine a streamlined, aerodynamic shape with a low center of gravity. Paired with the only CNC milled driver face, it delivers substantial improvements in club speed, ball speed and distance without sacrificing forgiveness.

 

 

 

THE ULTIMATE
FORMULA FOR SPEED.

 

Longer starts with Faster. Faster starts with SPEEDBACK, a revolutionary advancement in low CG, efficient aerodynamics, and precision CNC milled face technology that delivers the Ultimate Formula For Speed.

 

 

 

SPEEDBACK AERO DESIGN.

 

SPEEDBACK Technology delivers Cobra's most aerodynamic club shape which utilizes rounded leading edges, a raised crown, a raised skirt and a raised tail. This design streamlines the clubhead to promote an uninterrupted flow of air from the leading edge to the tail, to reduce drag and increase club speed.

 

 

 

OPTIMIZED AERO AND LOW CG.

 

A low CG structure comprised of titanium and tungsten moves the CG low and deep, creating a more efficient transfer of energy to the ball for optimized launch and spin, while maintaining an aerodynamic shape.

 

 

 

CNC PRECISION
MILLED FACE.

 

In an industry where everyone claims to have a fast driver face, ours is the only one that is CNC milled. A process that is up to 5 times more precise than conventional hand-polished driver faces, CNC milling delivers our thinnest and hottest face design repeatedly on every driver.

 

 

 

UP TO 5 TIMES
MORE PRECISE

 

CNC milling allows face thicknesses and curvatures to be controlled to tighter tolerances, ensuring consistent performance across every driver manufactured.

 

 

 

NDUSTRY LEADING
TECHNOLOGY

 

CNC milling is an industry leading technology that took two and a half years to perfect. We are the only company to feature CNC milling in both our driver and fairway faces.

 

 

 

OUR THINNEST
& HOTTEST FACE

 

CNC milling yields more precise face thickness compared to manual hand polishing, allowing us to design a thinner and faster conforming face.

 

 

 

SPEED TUNED
PERFORMANCE.

 

Dual Roll adds distance to your drives by reducing the gear effect that negatively impacts launch and spin on shots hit high and low on the face. Each driver is SPEED TUNED with optimized top and bottom curvatures to tune launch and spin for different swing speeds and attack angles.

 

 

 

DUAL ROLL TECHNOLOGY.

 

Bulge and roll curvatures are CNC milled into the face following exact specifications in the 3D CAD file design to ensure consistent performance in every driver we manufacture.

 

1. TOP ROLL CURVATURE

 

The top half features more curvature than the bottom half of the face to promote higher launch with reduced spin on shots hit above the centerline.

 

2. 7-DEGREE AXIS TILT

 

The axis is tilted at a 7 degree angle to account for the amount of toe droop that occurs during a typical swing.

 

3. BOTTOM ROLL CURVATURE

 

The bottom curvature is SPEED TUNED to optimize the loft of each driver head (9.0, 10.5, 12.0 to 12.5 women's & junior's) to maximize launch and spin for different swing speeds and attack angles on shots hit below the centerline.

 

 

 

PERFECTED BULGE

 

Three different horizontal bulge curvatures are CNC milled into the face to control loft and face angle on the heel, toe and center areas. Having perfected bulge curvatures is crucial to minimize the gear effect on shots hit on the toe and on the heel so the ball ends up closer to the target line.

 

 

 

E9 TECHNOLOGY

 

E9 Technology is a variable thickness structure designed in an elliptical shape (along 9 different points) that expands the SWEET ZONE across a typical miss-hit pattern that ranges from the low heel to high toe areas.

 

 

 

STRAIGHTER, MORE
CONSISTENT BALL FLIGHTS.

 

E9 and Dual Roll technologies are optimized for each driver loft, while CNC milling creates precise bulge and roll curvatures to improve driving accuracy and distance on off-center hits.

 

 

 

COBRA'S FIRST EVER
CARBON WRAP CROWN

 

Continually pushing the boundaries of innovation, Cobra engineers have created our largest carbon fiber crown design that is the first to wrap over the crown onto the body. This design produces a 12% larger carbon fiber area that saves 10 grams compared to titanium driver crowns.

 

 

 

PWR RIDGES

 

Engineered creases called PWR Ridges frame alignment and add rigidity to the carbon crown structure to create more energy return and power to the ball to maximize speed.

 

 

 

360 AERO TECHNOLOGY

 

Polymer crown trips are positioned relative to the direction of airflow around the club head to reduce drag and increase clubhead speed. Using a lightweight polymer material on the crown trips improves aerodynamics without raising the center of gravity. Titanium trips are positioned on the sole to speed up the flow of air traveling underneath the driver.

 

 

 

TUNE YOUR
BALL FLIGHT.

 

The KING® F9 SPEEDBACK™ drivers feature adjustable center of gravity (CG) and MyFly loft technologies, allowing you to fine-tune trajectory and launch to maximize distance.

 

 

 

ADJUSTABLE CG

 

Customize your center of gravity (CG) position using moveable weight technology. A heavy weight (14g) and lightweight (2g) can be moved to the front or back position to fine-tune trajectory, launch and spin.

 

 

 

MYFLY 8 WITH SMART PAD

 

8 easily adjustable loft settings allow players to manage launch and spin conditions to optimize distance. Smart Pad Technology keeps the face square at address regardless of the loft setting.

 

 

 

 

Write your own review
  • Bad
  • Excellent
Product tags
Contact our PGA Pro

We have PGA Pro's on hand to give expert advice.

Request a call back or send us a message

Close
Please fill out the following details and we will call you back asap!