Search
Filters
Close

0% Finance Now Available Over 6-12 Months!

Minimum basket value £300

Powakaddy FW3 Electric Trolley - Reconditioned with 2 Yr Warranty

Reconditioned Powakaddy Fw3 - Fully tested by Powakaddy Technicians in their workshop and confirmed to be in perfect working order. Frame is in immaculate condition. Comes with a Lithium Battery and Charger with a 2 Year Powakaddy Warranty on Frame, Battery and Charger.
Manufacturer part number: 00300-01-009-01
GTIN: 5060520432939
Delivery date: Next Business Day (If ordered before 1pm - Please Note: N.Ireland, Channel Islands and Remote Areas of Scotland would be 2 Days)
Manufacturer: Powakaddy
*
*
£299.99

Trolley Instructions:-

Fit the wheels by pressing the yellow release clip and pushing onto the axle until the clutch is engaged. Note: the wheels can be locked into two positions; push onto the inner groove to engage drive. The outer groove can be used when drive is not required. To open the frame, slide the main lock (highlighted below) forward to release the handle latch and open as shown below.

 

Your FW trolley features a new Plug’n’Play™ battery system. Once your battery is charged and trolley assembled connect your battery as shown. Engage the rear of the battery first.

Press the front until the battery clips into position. The trolleys power will automatically be connected. To remove the battery depress the front latch (highlighted) and lift the battery out. The Lithium battery operates in the same way.

Note: The Lithium battery can be stored within the tray for transportation and storage. Please ensure you de-activate the battery using the red isolation switch located on the underside. Leaving your battery in the ON (1) position could lead to your battery discharging or trolley activating during transportation.

 

Your trolley will already be pre-set to run straight. If you find your trolley tracking to the left or right you can re-adjust this by releasing the front wheel lever and rotating the adjustment roller. Rotate up to make your trolley track more to the LEFT and rotate down to track more to the RIGHT. Once you are happy the trolley is running straight re-apply the lever to lock in position.

 

Turn to control the speed of the trolley in normal operation. Press to pause and resume your selected speed.

 

Located under the screen. Open the hatch to charge GPS & mobile  devices. The output is rated to 5v/500mA suitable for most USB devices.

 

Power Indicator: Displays whether power is being applied to the drive system. (on/off) The light will illuminate red on start up to indicate the motor power condition as off. Press the on / off control in the centre to power the motor on and the green light will illuminate. Rotate the control dial clockwise to increase and counter-clockwise to decrease the speed.

 

The ADF function is a convenient way of sending your trolley a set distance. For example when you are approaching a green you can send the trolley towards the next tee if the route allows. Please note it is not recommended to send your trolley unattended over steep or rough terrain. To activate press and hold the Central Control Knob until ‘A’ appears on screen. Rotate the control knob to select from:

1 = 15Yrds 2 = 30Yrds 3 = 45Yrds.

 

To start the function press the control knob. WARNING! Before using the ADF function please ensure the route is clear from any obstacles. In an emergency the trolley can be stopped by pressing the control knob.

 

Once your battery is connected your trolley will be ready to use. The FW7 and FW7 EBS include a colour multifunctional display. The LCD will illuminate showing the ‘Default Display’ in pause mode.

 

Turn to control the speed of the trolley in normal operation. Press to pause and resume your selected speed.

 

Left function button: Press to scroll between distance measuring.

Drive – Reset before leaving the tee to measure your drive. To reset press and hold the left function button (note this will also reset your approach).

Approach – measure your “approach” distance. Reset your “approach” measurement (select “approach” press and hold the left function button to reset) as you go past the nearest Fairway Distance Marker. Walk to your ball and subtract the distance measured from the marker distance. This will be the required distance to the green.

Total Distance – This will show the total distance covered by the trolley. This cannot be reset. Right function button: Press to scroll between Time and Elapsed time. Time – This displays the current time. To change this see below. E

lapsed time – This displays the “on” time of the trolley. This will reset when the battery is disconnected.

 

Your new trolley is ready to use but there are a number of preferences you can change in the programming mode:

1: Press and hold both function buttons for 3 seconds to enter programing mode.

2: Press the right function button to scroll through the options. Select or modify the option by pressing the central control knob.

3: Press and hold both function buttons to save and exit after changing any settings. The display will show the default display.

Time – With the clock flashing rotate the control knob to the required digit and press to save each digit

Comp mode – With ‘COMP’ highlighted on the display press the control knob to turn the ‘competition’ mode on and off. 

 

Just a quick note. When your trolley arrives please dont forget to register for your Powakaddy trolley on their website here: http://www.registermypowakaddy.com/

 

This will activate your Powakaddy warranty.
 

 

- Reconditioned - Fully tested by Powakaddy Technicians in their workshop

- Confirmed to be in perfect working order. 

- Frame is in immaculate condition. 

- Comes with a Lithium Battery and Charger

- 2 Year Warranty on Frame, Battery and Charger.

 

WITH NEXT WORKING DAY DELIVERY! (if ordered before 2pm)

Our couriers are DPD Local - They offer a 1 hour window notification on deliveries to make getting your parcel even more convinient!

 

 

PLEASE NOTE - ELECTRIC TROLLEYS CANNOT BE SENT ABROAD AS WARRANTY WILL NOT BE VALID

 

Trolley Instructions:-

Fit the wheels by pressing the yellow release clip and pushing onto the axle until the clutch is engaged. Note: the wheels can be locked into two positions; push onto the inner groove to engage drive. The outer groove can be used when drive is not required. To open the frame, slide the main lock (highlighted below) forward to release the handle latch and open as shown below.

 

Your FW trolley features a new Plug’n’Play™ battery system. Once your battery is charged and trolley assembled connect your battery as shown. Engage the rear of the battery first.

Press the front until the battery clips into position. The trolleys power will automatically be connected. To remove the battery depress the front latch (highlighted) and lift the battery out. The Lithium battery operates in the same way.

Note: The Lithium battery can be stored within the tray for transportation and storage. Please ensure you de-activate the battery using the red isolation switch located on the underside. Leaving your battery in the ON (1) position could lead to your battery discharging or trolley activating during transportation.

 

Your trolley will already be pre-set to run straight. If you find your trolley tracking to the left or right you can re-adjust this by releasing the front wheel lever and rotating the adjustment roller. Rotate up to make your trolley track more to the LEFT and rotate down to track more to the RIGHT. Once you are happy the trolley is running straight re-apply the lever to lock in position.

 

Turn to control the speed of the trolley in normal operation. Press to pause and resume your selected speed.

 

Located under the screen. Open the hatch to charge GPS & mobile  devices. The output is rated to 5v/500mA suitable for most USB devices.

 

Power Indicator: Displays whether power is being applied to the drive system. (on/off) The light will illuminate red on start up to indicate the motor power condition as off. Press the on / off control in the centre to power the motor on and the green light will illuminate. Rotate the control dial clockwise to increase and counter-clockwise to decrease the speed.

 

The ADF function is a convenient way of sending your trolley a set distance. For example when you are approaching a green you can send the trolley towards the next tee if the route allows. Please note it is not recommended to send your trolley unattended over steep or rough terrain. To activate press and hold the Central Control Knob until ‘A’ appears on screen. Rotate the control knob to select from:

1 = 15Yrds 2 = 30Yrds 3 = 45Yrds.

 

To start the function press the control knob. WARNING! Before using the ADF function please ensure the route is clear from any obstacles. In an emergency the trolley can be stopped by pressing the control knob.

 

Once your battery is connected your trolley will be ready to use. The FW7 and FW7 EBS include a colour multifunctional display. The LCD will illuminate showing the ‘Default Display’ in pause mode.

 

Turn to control the speed of the trolley in normal operation. Press to pause and resume your selected speed.

 

Left function button: Press to scroll between distance measuring.

Drive – Reset before leaving the tee to measure your drive. To reset press and hold the left function button (note this will also reset your approach).

Approach – measure your “approach” distance. Reset your “approach” measurement (select “approach” press and hold the left function button to reset) as you go past the nearest Fairway Distance Marker. Walk to your ball and subtract the distance measured from the marker distance. This will be the required distance to the green.

Total Distance – This will show the total distance covered by the trolley. This cannot be reset. Right function button: Press to scroll between Time and Elapsed time. Time – This displays the current time. To change this see below. E

lapsed time – This displays the “on” time of the trolley. This will reset when the battery is disconnected.

 

Your new trolley is ready to use but there are a number of preferences you can change in the programming mode:

1: Press and hold both function buttons for 3 seconds to enter programing mode.

2: Press the right function button to scroll through the options. Select or modify the option by pressing the central control knob.

3: Press and hold both function buttons to save and exit after changing any settings. The display will show the default display.

Time – With the clock flashing rotate the control knob to the required digit and press to save each digit

Comp mode – With ‘COMP’ highlighted on the display press the control knob to turn the ‘competition’ mode on and off. 

 

Just a quick note. When your trolley arrives please dont forget to register for your Powakaddy trolley on their website here: http://www.registermypowakaddy.com/

 

This will activate your Powakaddy warranty.
 

 

- Reconditioned - Fully tested by Powakaddy Technicians in their workshop

- Confirmed to be in perfect working order. 

- Frame is in immaculate condition. 

- Comes with a Lithium Battery and Charger

- 2 Year Warranty on Frame, Battery and Charger.

 

WITH NEXT WORKING DAY DELIVERY! (if ordered before 2pm)

Our couriers are DPD Local - They offer a 1 hour window notification on deliveries to make getting your parcel even more convinient!

 

 

PLEASE NOTE - ELECTRIC TROLLEYS CANNOT BE SENT ABROAD AS WARRANTY WILL NOT BE VALID

 


We now use DHL as our courier.

They offer a fantastic, reliable service!

* Email/Text notifications give you a 1 hour delivery window.

* Reply to your notification to give any special delivery instructions.

* Tracking number will be added to your eBay order.
 
 
NEXT WORKING DAY DELIVERY only available if ordered before 1pm.

 

Write your own review
  • Bad
  • Excellent
Product tags
Contact our PGA Pro

We have PGA Pro's on hand to give expert advice.

Request a call back or send us a message

Close
Please fill out the following details and we will call you back asap!